Helpful Sharkhide Information

Sharkhide Aluminum Cleaner

SHARKHIDE Aluminum Cleaner is a HIGHLY CONCENTRATED blend of Acids, and cleaning agents that you dilute (with water) to suit the severity of your application. It can be applied anywhere from straight to diluted as much as 10:1 or more depending on the desired results.
Best applied to dry aluminum with a QUART TRIGGER TYPE SPRAY BOTTLE WITH AN ADJUSTABLE TIP. Set the adjustable nozzle to the finest mist possible. Mist a 6' to 8' section from the bottom up, let the foam work for a few minutes and rinse off. THAT'S IT! No scrubbing required.
SHARHIDE Aluminum Cleaner will not harm carpeted bunks, paint or decals. When you're done, that old dark streaked and stained finish will be gone and you're left with a clean, uniform, streak free off white finish. The typical 20â€™ to 25â€™ Pontoon Boat takes about two quarts of Sharkhide Aluminum Cleaner to do the job.
Click here to watch a video

Sharkhide Metal Protectant

This forms an air tight film over any metal surface, and will protect against just about anything Mother Nature can throw at it.
SHARKIDE works fantastic on things like pontoon boats, T-Tops, aluminum boat trailers, house boats and fishing boats. In most instances, a couple of good coats can last many years. Itâ€™s not uncommon to see three to five years of protection before applying a fresh coat.
SHARKHIDE can be applied by wipe, spray, brush, or dip, depending on the surface texture and desired finish. Generally speaking, for a smooth finish, the preferred method is to wipe it on.

Sharkhide Aluminum Polish

This allows you to go from a dull finish to a mirror like, reflective shine in just minutes with a single product!
SHARKHIDE Aluminum Polish can be applied by hand as well as variable speed high quality buffers. Since aluminum varies in alloy and hardness, it's suggested to try different pads as well as different buffer speeds to find the best combination for your job.