Toll Free: 1-888-383-7615

Pontoon Bimini Frame 8' x 10'

SKU: 810FR
List Price: $339.99
Price: $319.99
You Save: $20.00 (6%)
Pontoon Boat Bimini Top Frame
Pontoon Bimini Frame 8' x 10'
Pontoon Boat Bimini Top Frame
Pontoon Bimini Frame 8' x 10'
Pontoon Boat Bimini Top Frame
Pontoon Bimini Frame 8' x 10'
replacement pontoon boat bimini frame
Pontoon Bimini Frame 8' x 10'
(Click to see larger image and other views)
Product Details
Heavy Duty Replacement Pontoon Bimini Frame Details:
  • Frame includes front bars and rear adjustable struts (straps can be purchased by clicking here)
  • Frame Size: 8' W x 10'  L - 4 Bow Bimini Frame
  • Frame Fits: 92" - 96" wide applications
  • Frame Tubing: 1.25" Square Tube Frame
  • Made of quality heavy duty Anodized Aluminum
  • All Aluminum Hardware / No Plastic Parts!
  • Wiring for stern light included (stern light sold separately)
  • Installs fast and easy
  • (1) Year Warranty
Pontoon Boat Bimini Top Frame
Pontoon Bimini Frame 8' x 10'
Pontoon Boat Bimini Top Frame
Pontoon Bimini Frame 8' x 10'
Pontoon Boat Bimini Top Frame
Pontoon Bimini Frame 8' x 10'
replacement pontoon boat bimini frame
Pontoon Bimini Frame 8' x 10'
(Click to see larger image and other views)
4-Bow Pontoon Bimini Top & Frame Installation Instructions:

  1. For an 8' or 10' top you want to measure from the front of your helm back to 8' or 10'. From there find the middle of your tape measure and mark it-*This is your middle H-Bracket mounting point.* Mount your H-bracket with 1-3/4 Phillips Pan Bolt*
  2. Find a common spot to measure on both sides of your boat and mount the opposite side H-bracket. *Make sure it matches the H-bracket on the other side*
  3. Now you want to locate your left or right sided bow assembly's, there should be four pieces. Here you want to attach the two pieces to each other making one large piece for each side. *The adjustable strut goes in the front and the solid strut goes in the back.* Connect at the H- Bracket point with 1-3/4 Phillips Pan Bolt.  bimini top installation
  4. Attach the bow assembly's to your middle H-Bracket and secure with pull pin.  bimini top install
  5. Line up the rear struts perpendicular to the top rail, creating a 90 degree angle. Mark the position for the holes in the H -bracket on the top rail and drill completely through the rail.  pontoon canopy installation
  6. Repeat steps 1-5 on the opposite side.  pontoon boat bimini installation
  7. Once both bow assembly's are secure you will start to attach your center bows. *The connector pieces come pre-attached to the center bows* Make sure the bow with the hole cutout goes in the back for the stern light. *You may want to place all bows on the corresponding arms before securing with screws on the bottom side*  boat bimini installation
  8. Now find your bimini top fabric and lay it out to find the back side. *There will be a hole cutout for the stern light indicating it is the back*
  9. Find your last center bow and zipper that into the last sleeve of the canvas.  boat bimini install
  10. Repeat step 9 for bows 2-4.  pontoon boat bimini installation
  11. Open your top and let your front strut hang loose. Directly below mount your front H-Bracket with the 1-3/4 Phillips Pan Bolt like you did in step 5 and secure with the pull pin.  pontoon boat bimini installation
  12. Step back and straighten out the top, ensuring the middle seam is centered on the boat. Finish it off by securing the four snaps, one on each corner.  boat bimini top installation instructions
  13. Congratulations you just installed your new pontoon boat bimini top!

Product Reviews

Average Ratings: Empty Star Empty Star Empty Star Empty Star Empty Star

Please Rate Product:

Empty Star Empty Star Empty Star Empty Star Empty Star

Please Rate Experience:

Empty Star Empty Star Empty Star Empty Star Empty Star
Rate this product:

"Easy replacement"

on 8/7/2023 9:34:47 AM

Empty Star Empty Star Empty Star Empty Star Empty Star

Review Comment: We live on a canal & use our pontoon boat frequently. That being said, we usually leave our bimini up (not a good practice😱) Last week a strong wind actually tore the aluminum frame in two! Fortunately, the fabric cover was not damaged. The replacement frame we got was delivered promptly & was easy to construct with the online instructions. We were able to use the existing rail supports. We’re also pleased that the frame seems sturdier than the original when we went boating. Thank you for a gre... More details

Please Rate Product:

Empty Star Empty Star Empty Star Empty Star Empty Star

Please Rate Experience:

Empty Star Empty Star Empty Star Empty Star Empty Star

More great Brands in this category...