8 × 10 Heavy Duty Pontoon Bimini Frame

Our Products: Pontoon Bimini Tops and Parts > Pontoon Bimini Top Frames

SKU: 810FR

Average Ratings: Empty Star

List Price: $339.99

Price: $319.99

You Save: $20.00 (6%)

8 × 10 Heavy Duty Pontoon Bimini Frame

8 × 10 Heavy Duty Pontoon Bimini Frame

(Click to see larger image and other views)

Product Details

8 x 10' Heavy-Duty Pontoon Bimini Frame

Built to Last. Designed for Comfort.

Upgrade your pontoon with our 8' × 10' Heavy-Duty Bimini Frame, engineered for long-lasting performance and effortless installation. Constructed from premium 1¼" square anodized aluminum tubing, this 4-bow frame provides superior strength and corrosion resistance for seasons of reliable shade and protection on the water.

Key Features:

Spacious 8' W × 10' L Coverage – Offers generous shade for larger pontoons.
Heavy-Duty Aluminum Frame – Made from durable, marine-grade 1¼" square anodized tubing.
Complete Frame Kit – Includes all aluminum hardware: front support bars, rear struts, and mounting brackets (no plastic components).
Light-Ready Design – Pre-wired for optional stern light installation (light sold separately).
Simple Installation – Designed for quick, straightforward setup on most pontoon models.

Whether you're cruising, entertaining, or just relaxing on the water, this Bimini frame offers the strength and shade you need to enjoy your time comfortably and confidently.

Note: Frame only — Bimini top fabric sold separately. 1-year limited warranty included. Not recommended for saltwater environment

Pontoon Boat Bimini Installation Videos

8 × 10 Heavy Duty Pontoon Bimini Frame

(Click to see larger image and other views)

4-Bow Pontoon Bimini Top & Frame Installation Instructions:

For an 8' or 10' top you want to measure from the front of your helm back to 8' or 10'. From there find the middle of your tape measure and mark it-*This is your middle H-Bracket mounting point.* Mount your H-bracket with 1-3/4 Phillips Pan Bolt*
Find a common spot to measure on both sides of your boat and mount the opposite side H-bracket. *Make sure it matches the H-bracket on the other side*
Now you want to locate your left or right sided bow assembly's, there should be four pieces. Here you want to attach the two pieces to each other making one large piece for each side. *The adjustable strut goes in the front and the solid strut goes in the back.* Connect at the H- Bracket point with 1-3/4 Phillips Pan Bolt.
Attach the bow assembly's to your middle H-Bracket and secure with pull pin.
Line up the rear struts perpendicular to the top rail, creating a 90 degree angle. Mark the position for the holes in the H -bracket on the top rail and drill completely through the rail.
Repeat steps 1-5 on the opposite side.
Once both bow assembly's are secure you will start to attach your center bows. *The connector pieces come pre-attached to the center bows* Make sure the bow with the hole cutout goes in the back for the stern light. *You may want to place all bows on the corresponding arms before securing with screws on the bottom side*
Now find your bimini top fabric and lay it out to find the back side. *There will be a hole cutout for the stern light indicating it is the back*
Find your last center bow and zipper that into the last sleeve of the canvas.
Repeat step 9 for bows 2-4.
Open your top and let your front strut hang loose. Directly below mount your front H-Bracket with the 1-3/4 Phillips Pan Bolt like you did in step 5 and secure with the pull pin.
Step back and straighten out the top, ensuring the middle seam is centered on the boat. Finish it off by securing the four snaps, one on each corner.
Congratulations you just installed your new pontoon boat bimini top!

Product Reviews

Average Ratings: Empty Star

Please Rate Product:

Please Rate Experience:

>> Read all product reviews [1] | Write your own review

Rate this product:

"Easy replacement"

Joan Worrall on 8/7/2023 9:34:47 AM

Empty Star

Review Comment: We live on a canal & use our pontoon boat frequently. That being said, we usually leave our bimini up (not a good practice😱) Last week a strong wind actually tore the aluminum frame in two! Fortunately, the fabric cover was not damaged. The replacement frame we got was delivered promptly & was easy to construct with the online instructions. We were able to use the existing rail supports. We’re also pleased that the frame seems sturdier than the original when we went boating. Thank you for a gre... More details

Please Rate Product:

Empty Star

Please Rate Experience:

Empty Star

More great Brands in this category...