Request Free Samples!

Would you like FREE samples of our Pontoon Boat Seat Vinyl, Marine Grade Carpet, Vinyl Flooring, Aluminum Fence Paneling or Pontoon Boat Bimini material before you make a purchase?

No problem! We will be happy to send you Free samples of any style and color that we offer.

Once you have decided on the colors or styles of samples you wish to receive please feel free to call us toll free @574-204-2345 with your request. You can also send us an email at customerservice@restorepontoon.com. Please be sure to include your name, the kind of samples you wish to receive and your mailing address. Our friendly staff will gladly take your sample request and send it out to you that same day, free of charge! If you're unsure which style or color would be best for your application, or if you just have some questions please do not hesitate to call us. It would be our pleasure to assist you and answer any questions you may have. Thank You!

Call Us: 574-204-2345 or Email: customerservice@restorepontoon.com

(Mon - Thu) 830am - 430pm (EST) / (Fri) 830am - 230pm (EST)

How to Install Replacement Pontoon Fence Paneling

Replacing your pontoon fence paneling is a great way to restore your boat’s appearance and give it a clean, factory-fresh look. Whether your old panels are dented, scratched, or faded, these step-by-step instructions will guide you through installing your new aluminum fence paneling from RestorePontoon®.

Tools & Materials Needed

• New pontoon fence paneling roll (from your kit)

• Rivet gun (manual or pneumatic)

• Electric drill with 1/8″ drill bit

• Tin snips or metal shears (Electric Metal Shears from Harbor Freight work well)

• Tape measure

• Flat scraper

• Rubber mallet

• Clamps or masking tape

• Marker or pencil

• Safety gloves & eye protection

Step-by-Step Installation

Read over these step-by-step suggestions to help replace your old dented or scratched aluminum paneling with our new paneling:

Step 1: Remove Existing Fence and Rails

• Remove all fencing and rails from your pontoon deck.

Step 2: Remove Fasteners

• Take out any screws or pop-rivets attaching the old fencing to the rails.

Step 3: Pry Open Aluminum Paneling

• Using a flat scraper, pry open the lips that pinch the aluminum paneling to the rails.

• Do this along the entire rail section.

Step 4: Remove Damaged Paneling

• Using a rubber mallet, knock out the old or damaged paneling section.

Step 5 & 6: Measure and Score New Paneling

• Measure the size of the replacement section needed.

• Score the aluminum paneling at the correct length using a straight edge and a utility tool or metal scribe.

Step 7: Bend and Separate Aluminum

• Place the scored piece on a sturdy edge.

• Bend the aluminum back and forth until it breaks apart cleanly.

Step 8: Insert New Paneling

• Slide the new aluminum paneling between the lips of the pontoon rails.

Step 9: Secure Paneling

• Pound down the lips of the rail with a rubber mallet.

• Apply any new pop-rivets as needed.

• Work slowly across the panel, bending a small amount at a time to keep the panel even and smooth.

Step 10: Optional – Add Hardware & Trim

• Install fence risers under each post to improve drainage and prevent corrosion.

• Attach the J-trim along the bottom edge for a finished appearance.

• Apply matching graphics included in your kit if desired.

Step 11: Inspect Your Work

• Check that all rivets and bolts are secure.

• Ensure panels are even, smooth, and free of wrinkles.

• Verify graphics are aligned and bubble-free.

Tips for Best Results

• Work slowly when bending and securing the aluminum to avoid uneven edges.

• Always wear gloves and eye protection when cutting or bending metal.

• Measure twice, cut once — extra care ensures a clean, professional finish.

Optional Paneling-Only Purchase

If you only need replacement paneling without the hardware or graphics, click here:
Replacement Aluminum Pontoon Paneling Only